CMC KUHNKE Front End Station

The CMC KUHNKE Front End Station is an innovative and accurate can gauge that delivers fast measurements of trimmed can products.

• Marca: CMC-Kuhnke

• Aplicações: Inspeção em Latas de Aerosol

• Código: 286 500:00

Benefícios & Vantagens

• Automatic can rotation and data transfer

• Multiple automatics measurements at one time

• Increased accuracy

• World class R&R

• No change parts for multiple heights and diameters

• Exceptionally accurate – wall thickness measurements have a resolution of 0.1 microns

• Provides a 360° scan of wall thickness

• Automatically adjusts to pre-configured measurement positions along a wall of a can

• Top wall height may be adjusted from 0 to 10mm

• Wall thickness data may be graphed on-screen

• Can height, top-wall, mid-wall and bottom depth are measured automatically

• Only one calibration master (can height and bottom depth) needed

Saiba Mais:

Brought to you by CMC-KUHNKE, our metal packaging testing specialist brand, the exceptionally accurate and repeatable FES-4000 front end gauge takes measurements including trimmed can height, dome depth and top and mid wall thickness.

Our industry-leading can gauge automatically rotates your cans and can perform 360° scans on the wall thickness of your samples.

Time saving can gauge testing

Our can gauge saves you time: With automatic can rotation, automatic data transfer and multiple measurements at one time.

We have invested world class R&R into this front end gauge. The wall thickness measurements have a resolution of 0.1 microns. Its automated measurements give you exceptional accuracy.

Can gauge early warning system

Measurement results are shown on the TFT Touch screen, with out-of-spec limits flagged in red to warn the user. The data can be transferred directly into Visionary QC™, or other data acquisition software.

Easy calibration can gauge inspection

You only need one calibration master (can height and bottom depth) needed for any can you want to inspect. Plus all of the can gauge and measurement-parameters are automatically adjusted and saved in the gauge control for later analysis.

The Industrial Physics testing portfolio

Got a food, beverage, or aerosol product that requires a metal container? We have the gauges, testers, and software to reduce the cost of production and increase the efficiency of your canning and bottling processes.

The CMC KUHNKE semi-automated back end gauge for two-piece beverage cans takes measurements quickly and accurately. Plus it adjusts automatically for multiple can heights.

Or why not take a look at the CMC KUHNKE dome reversal tester? It’s a semi-automated buckle tester designed to determine the pressure at which the bottom dome of a finished beverage can starts to buckle.

• Maximum positions: 36

• Maximum size can height: 205mm (8in)

• Maximum size can diameter: 52 mm (202)

• Minimum size can height: 55mm (2.125in)

• Minimum size can diameter: 84 mm (307)

• Measurement units: In, mm

• Range top-wall-height: up to 10mm (0.4in)

• Range mid-wall-height: 28 to 140mm (1.125 – 5.5in)

• Resolution trimmed can height: 0.01 mm (0.0004 in)

• Resolution dome depth: 0.001 mm (0.00004 in)

• Resolution top wall thickness: 0,0001 mm (0,1 micron)

• Resolution mid wall thickness: 0,0001 mm (0,1 micron)

• Accuracy trimmed can height: +/- 0,01 mm

• Accuracy dome depth: +/- 0,001 mm

• Accuracy top wall thickness: +/-0,001 mm

• Accuracy mid wall thickness: +/-0,001 mm

• Output: RS232

• Electrical power required: 24V-120/230VAC Power Adapter, 50-60Hz

• Air pressure required: 5 bar (73 psi)

• Size: 260 x 200 x 120cm (102 x 79 x 48in)

• Languages: English, German, Spanish, Chinese – others available upon request

• Characteristics: trimmed can height, dome depth, top-wall and mid-wall thickness